| Height of centres | mm | 250 | 280 | 330 | 360 |
| Swing over bed | mm | 500 | 560 | 660 | 720 |
| Swing over cross slide | mm | 310 | 370 | 470 | 530 |
| Swing in gap | mm | 680 | 740 | 840 | 900 |
| Distance between centers | mm | 1500 – 2200 – 3000 |
| Bed width | mm | 400 |
| Spindle bore | mm | 80 | 102 |
| Spindle nose | Camlock | 8″ |
| Number of spindle speeds | N. | 16 |
| Spindle speed range | rpm | 18:1500 | 15:1260 |
| Main motor power | Kw | 7.5
(9.2) | 9.2
(11) |
| Range of longitudinal feeds | mm/rev | (160) 0.05 – 11.52 |
| Range of transversal feeds | mm/rev | (160) 0.025 – 5.76 |
| Range of threads Metric | mm | (62) 0.05 – 112 |
| Range of threads Whitworth | T.P.I. | (80) 1/4 – 56 |
| Range of threads Module | mm | (54) 0.25 – 56 |
| Range of threads Diametral Pitch | DP | (80) 1/2 – 112 |
| Cross slide travel | mm | 360 |
| Top slide travel | mm | 150 |
| Tailstock quill diameter | mm | 80 |
| Tailstock quill travel | mm | 230 |
| Tailstock quill taper | Morse | 5 |
