| Height of centres | mm | 225 | 260 | 300 | 350 |
| Swing over bed | mm | 450 | 520 | 600 | 700 |
| Swing over cross slide | mm | 230 | 300 | 380 | 480 |
| Swing in gap | mm | 620 | 690 | 770 | 870 |
| Distance between centers | mm | 1000 – 1500 – 2000 – 3000 – 4000 – 5000 |
| Bed width | mm | 400 |
| Spindle bore | mm | 82 / 105 |
| Spindle nose | Camlock | 8″ / 11″ |
| Number of spindle speeds | N. | 24 / 12 |
| Spindle speed range | rpm | 9:1600 / 16:1200 |
| Main motor power (S6/S1) | Kw | 7.5
(9.2) | 9.2
(11) |
| Range of longitudinal feeds | mm/rev | (93) 0.028 – 6.43 / (65) 0.063 – 2.52 |
| Range of transversal feeds | mm/rev | (93) 0.012 – 2.73 / (65) 0.027 – 1.07 |
| Range of threads Metric | mm | (54) 0.5 – 224 / (22) 1 – 14 |
| Range of threads Whitworth | T.P.I. | (54) 1/8 – 72 / (25) 2 – 28 |
| Range of threads Module | mm | (54) 0.5 – 112 / (18) 0.5 – 7 |
| Range of threads Diametral Pitch | DP | (54) 1/4 – 64 / (24) 4 – 56 |
| Cross slide travel | mm | 300 | 340 |
| Top slide travel | mm | 130 | 150 |
| Tailstock quill diameter | mm | 75 | 85 |
| Tailstock quill travel | mm | 150 | 200 |
| Tailstock quill taper | Morse | 5 |
